SPC EZ CAM XR, Pair - 14mm (Subaru)

EZ Cams make non-adjustable two bolt struts adjustable up to ±1.75° camber change. Head markings show where the cam is for maximum change and an easy-to-manipulate toothed washer lets you set positive or negative change. Simply remove the upper OE bolt, loosen the lower bolt, install and adjust the EZ Cam to the desired change and then tighten everything to specification. This is an easy fix for camber issues and a perfect companion sale for any strut job. Save time, money and effort by making aligning two bolt struts a one person job without grinding. Keep one of each part number in stock, measure the OE threads, replace the OE bolt with SPC's EZ Cams to make your alignment jobs fast and profitable.

FEATURES

• Make camber changes a cost-effective, quick one-person job without grinding
• SPCs 12.9 grade bolt provides the best clamp load with the highest safety factor in the industry 
• Use a Hex Chromate-free finish for 700 hr salt spray results vs the competitors ~20 hr, to avoid any hydrogen embrittlement issues, and to be environmentally friendly
• Have markings on the bolt head to show you where the lobe is for easy orientation during adjustment.

SPECIFICATIONS

• Front Adjustment range: Camber ±1.75°
• Installation time: 0.4 hr/side
• Required: 1 kit per axle